You are currently browsing the tag archive for the ‘mass’ tag.

This is a quick example of how using Tracker software can generate a nice physics-related exploration. I took a spring, and attached it to a stand with a weight hanging from the end. I then took a video of the movement of the spring, and then uploaded this to Tracker.

**Height against time**

The first graph I generated was for the height of the spring against time. I started the graph when the spring was released from the low point. To be more accurate here you can calibrate the y axis scale with the actual distance. I left it with the default settings.

You can see we have a very good fit for a sine/cosine curve. This gives the approximate equation:

y = -65cos10.5(t-3.4) – 195

(remembering that the y axis scale is x 100).

This oscillating behavior is what we would expect from a spring system – in this case we have a period of around 0.6 seconds.

**Momentum against velocity**

For this graph I first set the mass as 0.3kg – which was the weight used – and plotted the y direction momentum against the y direction velocity. It then produces the above linear relationship, which has a gradient of around 0.3. Therefore we have the equation:

p = 0.3v

If we look at the theoretical equation linking momentum:

p = mv

(Where m = mass). We can see that we have almost perfectly replicated this theoretical equation.

**Height against velocity**

I generated this graph with the mass set to the default 1kg. It plots the y direction against the y component velocity. You can see from the this graph that the velocity is 0 when the spring is at the top and bottom of its cycle. We can then also see that it reaches its maximum velocity when halfway through its cycle. If we were to model this we could use an ellipse (remembering that both scales are x100 and using x for vy):

If we then wanted to develop this as an investigation, we could look at how changing the weight or the spring extension affected the results and look for some general conclusions for this. So there we go – a nice example of how tracker can quickly generate some nice personalised investigations!